-
material rubber; suitable for connection below/rear
protection cap -
manometer sealing
-
material brassself sealing adapter
-
extensionmanometer adapter series TH93
-
impact absorber for manometers series AB01
-
connection spigot; pressure tap horizontal only; clamping sleeve according to DIN 16283, AF27; operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inletsiphon in U-shape according to DIN 16282 series SI001
-
welding connection; pressure tap horizontal only; clamping sleeve according to DIN 16283, AF27; operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inletsiphon in U-shape according to DIN 16282 series SI002
-
connection spigot; pressure tap vertical only; clamping sleeve according to DIN 16283, AF27; operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inletsiphon in ring-shape according to DIN 16282 series SI003
-
welding connection; pressure tap vertical only; clamping sleeve according to DIN 16283, AF27; operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inletsiphon in ring-shape according to DIN 16282 series SI004
-
female thread/female thread; temperature max. 50°C; drain holemanometer stopcock series MSC01
-
female thread/spigot; temperature max. 50°C; drain holemanometer stopcock series MSC02
-
female thread/swivel sleeve; temperature max. 50°C; drain holemanometer stopcock series MSC03
-
spigot/swivel sleeve; temperature max. 50°C; drain holemanometer stopcock series MSC04
-
spigot/clamping sleeve; temperature max. 50°C; drain holemanometer stopcock series MSC05
-
pressure measuring at pressed button only, after releasing valve closes automatically; manometer is depressurized in normal position; pressure range max. 25bar, DVGW-certification max. 4bar
manometer push button valve series MPB01 -
according to DIN 16270; spigot/clamping sleeve
manometer stop-valve series MSV01 -
according to DIN 16270; spigot/swivel sleeve, shank for holder of measuring instruments
manometer stop-valve series MSV02 -
according to DIN 16271; spigot/tension sleeve with test spigot M20x1,5
manometer stop-valve series MSV03 -
according to DIN 16271; spigot/swivel sleeve, shaft for holder of measuring instruments with test spigot M20x1,5
manometer stop-valve series MSV04 -
according to DIN 16271; spigot/tension sleeve with test flange 60x25x10
manometer stop-valve series MSV05
