female thread; brass; seal NBR; temperature max. 100°C

temperature range -30...+70°C; operating pressure 20bar

material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; ATEX II 2 G/D; temperature range -60...130°C; colour black

material PVDF; multiplier for operating pressure 30°C = 0,7 / 90°C = 0,25; temperature range -40...100°C; colour natural

material PVC; colour transparent; with embedded hard PVC spiral white; temperature range -15...+60°C

material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; without fittings; temperature range -60...100°C; colour black/blue

material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; swivel fittings on both sides; antikink; temperature range -60...130°C; colour blue

axial; material polyurethane; multiplier for operating pressure 30°C = 0,86 / 60°C = 0,62; without fittings; temperature range -35...60°C; colour black/blue

according to DIN 16281; for wall mounting of stop valves for manometers

pressure measuring at pressed button only, after releasing valve closes automatically; manometer is depressurized in normal position; pressure range max. 25bar, DVGW-certification max. 4bar

according to DIN 16270; spigot/swivel sleeve, shank for holder of measuring instruments; seal PTFE

according to DIN 16271; spigot/swivel sleeve, shaft for holder of measuring instruments with test spigot M20x1,5; seal PTFE

according to DIN 16271; spigot/tension sleeve with test flange 60x25x10; seal PTFE

jet hole 3mm; suitable for pistols series S-26, S-23

jet hole 3mm; suitable for pistols series S-26, S-23

material aluminum painted black; 3 inlets with femal thread; outlets female thread; one-sided

Ø 80mm; accuracy 0,5% of full pressure range; connection 1/4" below; capturing pressure peaks; battery life time cycle 4000 hours; seal NBR

for wall mounting of stop valves for manometers

body stainless steel AISI 304; measuring unit, motion work copper based alloy; front glass mineral glass; connection below; ambient temperature -40...+60°C; medium temperature max. +60°C; class 1,0

measuring unit, motion work copper based alloy; front glass mineral glass; connection rear; ambient temperature -20...+60°C; medium temperature max. +60°C; class 1,0

material: 1.4016; screw zinc plated steel

material: 1.4301; screw zinc plated steel

bourdon tube manometer; measuring unit, motion work copper based alloy; front glass mineral glass; ambient temperature -20...+60°C; medium temperature max. +60°C; class 1,0; connection below

material AISI 304; operating pressure max. 16bar

material aluminum; outlets one-sided

material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,47; vacuum -0,87bar; temperature range -60...100°C

material PFA; multiplier for operating pressure 100°C = 0,60 / 200°C = 0,35; temperature max. 250°C; colour transparent-white

material polyamide; multiplier for operating pressure 30°C = 0,87 / 80°C = 0,43; vacuum -0,87bar; temperature range -60...130°C; delivered on drum

according to DIN 2391/C; EN 10305-4; outside galvanic zinc plated; blue chromium plated; inside bright; eddy current approved; material St37.4 white-zinc plated; incl. inspection certificate EN-10204-3.1; for material

material PTFE; multiplier for operating pressure 100°C = 0,65 / 200°C = 0,35; temperature range -60...250°C

material polyurethane; multiplier for operating pressure 30°C = 0,9 / 60°C = 0,65; vacuum -0,87bar; temperature range -35...60°C; delivered on drum

material polyurethane; operating pressure at 23°C 12bar; multiplier for operating pressure 60°C = 0,47; swivel fittings on both sides; antikink; incl. coupling, coupling plug DN 7,2; brass; temperature range -40...60°C; colour blue

material PA6 HL; multiplier for operating pressure 30°C = 0,83 / 80°C = 0,48; vacuum -0,87bar; temperature range -60...130°C

material silicone; temperature range -60...200°C; for the pressureless passage of liquids and gases

according to DIN 2391/C; DIN 2445-2/DIN 1630; EN 10305-4; phosphated; eddy current approved; material St37.4; incl. inspection certificate EN-10204-3.1; for material

high flexible; oil resistant; material soft-PVC; operating pressure at 23°C 16bar; multiplier for operating pressure 90°C = 0,375; temperature range -20...90°C; colour blue; antistatic

high flexible; material soft-PVC; operating pressure at 23°C 15bar; temperature range -20...60°C; colour blue

material soft-PVC; temperature range -15...60°C

according to EN ISO 1127 DIN 17456/58; heat treated; pickled; tolerance class D4/T3, according to DIN 2391 suitable for fittings; material AISI 316Ti; incl. inspection certificate EN-10204-3.1 for material

bourdon tube manometer; body stainless steel; front ring stainless steel bright; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection below; class 1,6

bourdon tube manometer; body stainless steel; front ring stainless steel bright; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection rear; class 1,6

body sheet steel, front ring 3-square chromium-plated; mounting clamp; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection rear; class 1,6

material soft-PVC; temperature range -15...60°C

water hose; temperature range -20...60°C

material brass; outlets female thread; 4 outlets, one-sided

material polyethylene; multiplier for operating pressure 30°C = 0,83 / 60°C = 0,57; vacuum -0,87bar; temperature range -10...60°C

body sheet steel; measuring unit, motion work copper based alloy; front glass acryl; ambient temperature -20...+60°C; medium temperature max. +60°C; connection rear; class 1,6; free of oil and grease for oxygen

material: chromium steel AISI 430; screw zinc plated steel